CNC textures / Tsuchime
Sheet T2Japanese hammer finish$16
Tsuchime Japanese hammer finish
Rows of small hammered dimples, after the finish on Japanese knives and copperware.
Relief0.119 in
Panel24 × 48 in
TilesNo
Price$16
Buy on Etsy · $16 →
Also in Texture Pack 01A on Etsy, with three more hand finishes.
In the download
What you get
- Full 24 × 48 in panel as a watertight STL, in inches
- 16-bit grayscale heightmaps at 25 and 50 px/in
- 12 × 12 in test tile, STL and PNG
- One-page cut sheet PDF with bit, settings and steps
- Works in Vectric Aspire, VCarve Pro, Carveco, Fusion 360 and Carbide Create Pro
- Licence to sell what you carve (not the files)
Cut sheet
How to cut it
- Cut the 12 × 12 in test tile on scrap first.
- Face the stock flat and zero Z on the top surface.
- Import the STL or the 50 px/in heightmap at 24 × 48 in, 0.119 in deep.
- Finish with a 1/2 in ball nose at 0.030 in stepover, raster along the 48 in length.
- Panels larger than 24 × 48 in: scale the 50 px/in map; this design does not repeat.
- Knock off fuzz with a nylon brush or 320 grit, then finish as normal.
Feeds and speeds on the cut sheet are calculated starting points. Run the test tile first and adjust for your machine.
Also in Pack 01
Let’s build something permanent.
Tell us about the room and what it needs to do. We work in and around Jacksonville, Florida.
Phone
Built-ins, cabinetry and architectural woodwork, made by hand in Jacksonville, Florida.
Contact
- (904) 576-1924
- Jacksonville, Florida
© 2026 Roxford Carpentry30.33° N, 81.66° W