Skip to content
Start a project

CNC textures / Marquetry

Sheet T14Cube parquetry, carved$22

Marquetry Cube parquetry, carved

Tumbling blocks carved for real. Every face is a true flat plane, so raking light gives the three-tone cube illusion.

Marquetry CNC carving texture rendered in walnut, seen at an angle
Rendered in walnut, low raking light
Marquetry texture seen from directly above
Plan view, straight down
Relief0.415 in
Panel24 × 48 in
TilesBoth ways
Price$22
Buy on Etsy · $22 →

Also in Texture Pack 03, four textures for $59.

In the download

What you get

  • Full 24 × 48 in panel as a watertight STL, in inches
  • 16-bit grayscale heightmaps at 25 and 50 px/in
  • 12 × 12 in test tile, STL and PNG
  • One-page cut sheet PDF with bit, settings and steps
  • Works in Vectric Aspire, VCarve Pro, Carveco, Fusion 360 and Carbide Create Pro
  • Licence to sell what you carve (not the files)
Cut sheet

How to cut it

  1. Cut the 12 × 12 in test tile on scrap first.
  2. Face the stock flat and zero Z on the top surface.
  3. Import the STL or the 50 px/in heightmap at 24 × 48 in, 0.415 in deep.
  4. Rough with a 1/4 in flat end mill, leaving 0.020 in of stock.
  5. Finish with a 1/4 in ball nose at 0.025 in stepover, raster along the 48 in length.
  6. Run a second finishing pass across the width to leave the flat faces glassy.
  7. Panels larger than 24 × 48 in: tile the file edge to edge; it repeats without a seam.
  8. Knock off fuzz with a nylon brush or 320 grit, then finish as normal.

Feeds and speeds on the cut sheet are calculated starting points. Run the test tile first and adjust for your machine.

Also in Pack 03
Truchet textureTruchetQuarter-arc mazeSamon textureSamonRaked gravel gardenChevron textureChevronHerringbone fluting

All 33 textures →

Let’s build something permanent.

Tell us about the room and what it needs to do. We work in and around Jacksonville, Florida.

Start a project →

Built-ins, cabinetry and architectural woodwork, made by hand in Jacksonville, Florida.

Studio

Shop

Contact

© 2026 Roxford Carpentry30.33° N, 81.66° W